Gtrend futures setting wiki

IMPORTANT IF YOU PURCHASED THE STRATEGY CONTACT ME TO ADD YOU TO THE PRIVATE GROUPS:: https://t.me/luis_gandara

LIVE DEMOS:
https://demo.ai-markets.shop:3026/
https://demo.ai-markets.shop:3027/

Important that  when adding a pair you add from under the Comunitydev tab if you add under all i will not run the autoconfig **important to only use one strategy per instance if you are using gtrendspot or futures  use a dedicated instance for gtrend spot or futures or the autoconfig can cause errors from or other strategies from gunbot** when adding each pair this can take several minutes add 1 pair at a time and wait for the both sides of the pair to be done populated  "FIRST_TIME_PAIR_RUNNING": true, if you see this value set to true this means it is still loading the values to the pair it will not start trading untill it goes to false automaticly

CORRECT WAY:

INCORRECT WAY:

When adding a new pair or starting for the first time you should only add the long pair and automaticly the short side pair will get added as well this values will populate so check the autoconfigpairvariable and config.js  file to verify this values got populated if not contact me

add 1 pair at a time and wait for the setings to populate before moving to the next one 
1 pair means long and short its required to have both long and short pair per pair example 

Trading Setup Instructions

These preset values are recommended for automated trading. Modify them only if you have a clear understanding of their impact on your trading strategy.

1. BOTH_SIDES_INITIAL_TL:

   • This value sets the initial trading limit. Start with the smallest viable value for pairs that can open positions this small. Increase it gradually if the pair does not start trading until reaching the minimum allowed by the exchange.

2. FREE_MONEY_PERIOD:

   • Defines the period during solo trading initiation when only one side of trading occurs. This marks the beginning period for solo trading.

3. TRADING_PERIOD:

   • After opening the first hedge and during subsequent hedging, this period dictates the trading duration until reaching the maximum position.

4. REDUCTION_PERIOD:

   • Used when the maximum position is reached, and both positions exceed MY_MAX_POSITION.

5. MY_MAX_POSITION:

   • Sets the maximum amount in USD for opening hedges after multiple hedge openings. Positions may open up to this amount; thereafter, micro openings are triggered, typically 10% above the current pair position.

6. FEES_EXPRESSED_IN_PNL:

   • Represents fees incurred when closing micro scalping positions at a loss. Slightly increase this to mitigate slippage risks.

7. ROE_PERC_HEDGED:

   • Defines the gain percentage for hedges. Avoid excessive increases to prevent missing exit opportunities due to greed. It's advisable to restart the system after closing a hedge.

8. SOLO_STEP_SIZE:

   • During solo trading initiation, this step size facilitates Dollar Cost Averaging (DCA) operations. Recommended default setting for solo trading.

9. TRADING_STEP_SIZE:

   • When initiating hedges, use the minimum step size to ensure hedge openings are not missed. Adjust slightly only if double orders are observed.

10. MY_SHORT_TL_MULTIPLIER:

    • This multiplier doubles each position opened with every hedge. Adjust as necessary, ensuring the SHORT_FILLED_MULTIPLIER remains just below to signal when a position is filled.

11. SHORT_FILLED_MULTIPLIER:

    • Corresponds to the multiplier adjustment for MY_SHORT_TL_MULTIPLIER. Use the recommended settings unless fully understanding the implications of any changes made.

These instructions provide guidance on how to interpret and potentially adjust the preset values for manual trading. Adjust settings cautiously, as they significantly impact trading outcomes.



DEFAULTS:

"BOTH_SIDES_INITIAL_TL": 3,
// This value is the initial trading limit. It's recommended to use the smallest value for pairs that can open positions this small. If the pair does not start trading, you might need to slightly increase this value until it reaches the minimum trading limit allowed by the exchange.

"FREE_MONEY_PERIOD": 1440,
// This period determines when only one side is trading at the beginning when trading solo. It defines the starting period.

"TRADING_PERIOD": 1440,
// This period is used after opening the first hedge and during hedging until reaching the maximum position.

"REDUCTION_PERIOD": 1440,
// This period is used when in the maximum position, and both positions are above MY_MAX_POSITION.

"MY_MAX_POSITION": 200,
// When multiple hedges are opened, this is the maximum amount in USD to open hedges. It will open a position above this amount, potentially up to 200. Afterward, it will micro open 10% above the current position on the pair.

"FEES_EXPRESSED_IN_PNL": 0.002,
// These are fees when micro scalping positions closed in loss. Increase this slightly to prevent slippage.

"ROE_PERC_HEDGED": 0.5,
// This is the gain for hedges. It's recommended not to increase this value too much. It's better to close a hedge and restart the system than to miss an exit opportunity due to greed.

"SOLO_STEP_SIZE": 0.03,
// When doing solo trading at the start of a pair, this is the solo step size. It will DCA (Dollar Cost Average) a couple of times when initiating trading. This is the recommended default setting.

"TRADING_STEP_SIZE": 0.01,
// When opening hedges, use the minimum step size due to the design of the hedge. Try to use the least to avoid missing hedge openings. Only change if you observe double orders, then increase slightly.

"MY_SHORT_TL_MULTIPLIER": 2,
// This is the multiplier for the hedge. It doubles each position opened every time a hedge is opened. This is the recommended setting, but adjust accordingly. Ensure SHORT_FILLED_MULTIPLIER stays just below to know when the position is filled.

"SHORT_FILLED_MULTIPLIER": 1.5,
// This value is for the multiplier. Change accordingly to MY_SHORT_TL_MULTIPLIER. These settings are recommended; only change if you understand the intended action.


WHEN THE FIRST TIME RUNNING THE STRATEGY OR PAIR THE DISPLAY LINES FOR THE SUPPORT/RESISTANCE FROM GTREND WILL APEAR UNTILL THE FIRST HEDGE IS OPENED LIKE THIS

W

This is how the hedge happens when the position is above the gtrend long s/r the position will be double this is how much is open in usdt in the above example its 72 and the short is 36 this is how hedging happens when it reaches max position it will lock the position witht he same values and then gtrend will work on debagging withought adding more to the hedging exept a 10% from bag value if you experience double orders please let me know you will se constant adding when doing in solo so they might not be double only on the hedging we should not see double orders if you do see let me know thank you